NRG Systems LOGR-S User Manual Download Page 21

Page: 21 / 73

NRG Product Manual

LOGR-S Data Logger

NRG_LOGR-S_Manual
Rev. 1.0

[email protected] | Page 21

5 November 2021

Analog Channel Configuration

Navigate to the Sensor menu at the top of the page and select

Analog Channels

from the drop-down

options. Select

Configure

next to the channel of your choice.

Selecting

Configure

for a specific channel will send you to the

Analog Channel Configuration

page for

the specified channel.

Using the

Sensor Type

drop-down, select the sensor you are programming onto this channel.

Edit the “Description” to fit your needs as necessary.

Edit the “Slope” and “Offset” fields if the included default values should be changed.

Enter the sensor serial number. The field can include numerical and alphabetical characters if
necessary.

Summary of Contents for LOGR-S










































































Search results

Summary of Contents for LOGR-S

Reviews:

Related manuals for LOGR-S

Brands by name

Popular brands

NRG Systems LOGR-S, User Manual

Search results

Summary of Contents for LOGR-S

Reviews:

Related manuals for LOGR-S

Brands by name

Popular brands