– 55 –
4.1.3 Pan detection
The cooking zone that has been switched on is only active
when a cooking pan is detected by the pan detection system.
The induction hob does not work:
– If there is no pan on the cooking zone or if the pan is
unsuitable for induction. In this case, it is impossible to put
the power on and the symbol will flash on the display.
– The operation is suspended when the pan is removed from
the cooking zone during cooking. The symbol will flash
on the display. The symbol will disappear when the pan is
placed back onto the cooking surface. The cooking will then
continue at the same power level as selected previously.
Switch off the cooking zone after use.
4.1.4 Indication of residual heat
After the cooking zone or hob has been switched off completely,
the hob glass will still be warm, which can be seen by
H
. The
H
symbol disappears when the cooking zone glass can be
handled without danger.
WARNING: As long as the residual heat indication
remains active, the cooking zone(s) must not be
touched and no heat-sensitive items should be
placed on the cooking zone. Risk of fire and burns.
4.1.5 Power function
Power function
P
boosts the power to the back cooking zone.
If this function is activated, these cooking zones will be
subjected to considerably higher power for 10 minutes.
The Power function is designed to quickly heat large quantities
of water, for pasta for example.
Switching Power on and off
Switch on power
Display
Press the cooking zone selection button.
Press the [—] button and then the [+] button
until
P
P
Switch off Power
9‐0
Press on the [—] button
Management of maximum power:
If this power limit is exceeded when switching to a high
selected cooking heat or switching the power setting on, the
power management module reduces the cooking position of
the relevant cooking zone. This cooking zone will first flash,
and it is then automatically reduced to the maximum possible
cooking heat
If simultaneous cooking is taking place on the 2 zones, the
power of 3700 W is divided between these 2 zones.
Cooking zone
in cm
Power (W)
Front
Ø 17,5
Normal: 1400
Back
Ø 21
Normal: 2300
Power: 3000
Power limit
Display
Selected cooking zone with Power function
P
Power limit activated
8
[9] reduced to [8] and flashes
4.1.6 Timer function
The timer function allows all cooking zones to be used
simultaneously for different periods of time (0 to 99 minutes)
for each zone.
Timer function
Setting or changing the cooking time
Display
Press the cooking zone selection button
.
Press [—] and [+] at the same time.
1‐P
Select the timer
00
Press [—] and [+] at the same time.
Reduce the time
30‐
29...
Press [—]
on the timer
Increase the time
01‐
02...
Press [+] on the timer
A point next to the power level display of the selected zone
lights up to show the activation of the timer.
The time has been selected and the countdown has begun.
Switch off the timer function
Select the timer
Display
Press the cooking zone selection button
.
Press [—] and [+] at the same time.
The lamp
for that zone
lights up
Stop the timer
00
Keep pressing [—] on the timer until the timer
displays
00
The timer can also be used as an independent cooking alarm
without selecting a cooking zone. If the hob is to be switched
off, the independent cooking timer will continue until the end of
the set time.
