NOVUS AUTOMATION
2/13
1
INTRODUCTION
The
TagTemp-NFC-LCD
is an electronic temperature logger
portable temperature logger with local indication via an LCD display.
The temperature data stored in the internal memory are downloaded
with a smartphone embedded with an NFC or an NFC interface
connected to a computer through an USB port (both not included).
TagTemp-NFC-LCD
features a replaceable 3.0 V (CR2450) lithium
battery. Its autonomy is relative and depends on some factors, such
as: operating temperature, minimum interval between logs, and
others, but is greater than 1 year.
Android
LogChart NFC
and
Windows
NXperience
applications are
the software tools used for the operation mode settings and the
collection and visualization of data. With these applications, you can
easily set the parameters such as starting or ending of acquisitions,
interval between acquisitions, alarm set points and other parameters.
You can download the operating manual and
NXperience
from the
manufacturer's website. You can download the
ANDROID™
LogChart-NFC
application from the
Google Play Store
.
2
MECHANICAL INSTALATION
TagTemp-NFC-LCD
can be fastened in three ways: using screws,
double-sided tape or with the frame.
For screw fastening, use two M3x14 mm screws. See
Fig. 01
.
To fasten with double-sided tape, apply the tape to the back of the
device, taking care not to cover the ID label.
The Frame
TagTemp-NFC
, sold separately, is also available to
embed the datalogger into a panel or a thermal box. See
Fig. 02
.
In both cases, the temperature sensor should be placed near the
place where you want to measure the temperature.
Fig. 01
– Screw fastening
Fig. 02 –
Frame
3
TECHNICAL DATA
Measure Range
Temperature: -40.0 °C to 100.0 °C.
Operating temperature
From -10 °C to 60 °C.
Accuracy
±
1 °C max. over the full measuring
range.
Note
: You can correct the
measurement error in the
OFFSET
parameter using the configuration
software.
Measurement
Resolutions
Temperature: 0.1 °C / 0.1 °F.
Memory capacity
4020 logs.
Measurement Interval
1-minute min.
4 hours max. (Models with no digital
input).
2 hours max. (Models with digital
input).
Supply
3.0 V (CR2450) lithium battery,
replaceable.
Estimated battery
autonomy
Above 1 year.
Dimensions (L x W x H)
Main body: 65 x 45 x10 mm. (sensor
not included).
RF Interface
ISO 15693 (NFC-V) compatible.
Logger-Smartphone
data transfer time
Up to 20 seconds.
LogChart-NFC software
Android version: 4.0 or above.
Languages: Portuguese and English.
NFC PC Interface
USB to NFC converter interface
(optional), compatible with
NXperience
for Windows ®.
Material
ABS+PC
Protection
IP55
Digital Input
(Available for specific model)
NO/NC dry contact
4
APPLICATIONS
TagTemp-NFC-LCD
can be used in processes or systems where
temperature monitoring and logging are required. It can be used
standalone or coupled to the
NOVUS
Smart Thermal Box (the
optimum solution for transport purposes). Generally, the products
and their respective temperature ranges for transport and storage are
as follows: frozen (-20 °C to -10 °C), refrigerated (2 °C to 8 °C),
cooled (8 °C to 15 °C °C) and dried (15 °C to 25 °C) products.
Moreover, it can also be used to monitor blood bags, blood
components, vaccines, food and other temperature-sensitive
products.
Compact equipment, can be kept next to the product to be
monitored. Due to its low-cost, can be used as a reusable logger in
logistical operations, where its return is viable.
