NOVUS AUTOMATION
21/48
Bv22
T0n
Buzzer on time
0
6500
s
0
Table 25
– Buzzer on time
7.3.7
Buzzer off time
Min.
Max.
Unit
Default
Bv22
T0ff
Buzzer off time
0
6500
s
0
Table 26
– Buzzer off time
7.3.8
Initial buzzer blocking
It allows blocking buzzer activation if the transmitter starts up in alarm condition.
Bv22
bLA
Initial buzzer blocking
Default:
yEs
Without initial buzzer blocking
No
With initial buzzer blocking
yEs
Table 27
– Initial buzzer blocking
7.3.9
Buzzer status in case of sensor error
It allows you to configure the buzzer output so that it is activated in case of sensor reading error.
Bv22
Err
Buzzer status in case of sensor error
Default:
oFF
Buzzer off
oFF
Buzzer on
On
Table 28
– Buzzer status in case of sensor error
7.4
HMI CONFIGURATION CYCLE
The HMI configuration cycle allows for adjusting contrast, display backlight operating mode and functions of increase and decrease keys.
7.4.1
Backlight
It adjusts the display backlight operating mode.
Table 29
– Backlight
7.4.2
Contrast
It adjusts the display contrast. Depending on the preferred viewing angle, the contrast may need to be adjusted to improve the clarity of information
on the display.
1xM
Cont
Contrast
Default:
On
Contrast 1 (-40° in relation to the horizontal line)
1
Contrast 2 (-20° in relation to the horizontal line)
2
Contrast 3 (0° in relation to the horizontal line)
3
Contrast 4 (+20° in relation to the horizontal line)
4
Contrast 5 (+40° in relation to the horizontal line)
5
Table 30
– Contrast
1xM
bclt
Backlight
Default:
On
Off
Off
Always on
On
On for 15 seconds after pressing any key
Prss
