NOVUS AUTOMATION
9/48
5
INSTALLATION
5.1
MECHANICAL INSTALLATION
The
RHT
Climate
Transmitter
WM
model was designed to be secured to a wall by two mounting holes on the transmitter, as shown in
Fig. 14
.
Mounting should follow the sequence of steps below:
•
Use the device’s perforation template to mark the position of transmitter mounting bore holes;
•
Make the two holes using a drill with bit number 6. The bore holes should be deeper than the size of bushings;
•
Insert bushings in holes. Bushings should be completely inserted into the wall;
•
Position the transmitter on the wall, aiming to align with the perforations, and use bolts to secure it to the wall.
Bolts and bushings do not come with the device.
The device should be mounted with the sensor capsule facing downward to ensure the specified precision and protection
rating.
Fig. 14
– Mechanical Installation
The
RHT
Climate
Transmitter
DM
model it is mounted via a flange. First the flange is mounted on the duct wall, then the transmitter rod is inserted
into the central bore hole on the flange and secured.
5.1.1
DIMENSIONS
5.1.1.1
RHT
Climate
TRANSMITTER (WM MODEL)
Fig. 15
– Dimensions of
WM
model
