6000 series IP recorders
-
User
’
s manual
-
version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
47
2.5.4. S.M.A.R.T. Information
After selecting this tab displays information about the data S.M.A.R.T used in hard drives.
2.6. Network
2.6.1. TCP/IPv4
This menu defines the parameters associated with the operation of the device in the network. Before
configuring these settings, please contact your network administrator to determine the proper and
allowed network parameters to be entered in this menu.
Network settings in part PORT NETWORK NO. 1 allow you to configure the network settings of
TCP / IP for the primary network interface. The recorders are equipped with ports PoE network
settings for PoE ports are set in the section INTERNAL PORT ETHERNET.
NOTE: IP subnets set for both interfaces must be different
Checking the IP address from DHCP - enables downloading an address from the DHCP server.
Available settings are as follows:
IP ADDRESS - Allows you to set the IP address for the main interface
SUBNET MASK - Sets the subnet mask for the main interface
GATEWAY - sets network gateway
Checking the OBTAIN DNS AUTOMATICALY check-box - to enable downloading DNS settings
from DHCP server.
NVR OPERATING