6000 series IP recorders
-
User
’
s manual
-
version 1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
36
2.2.4.4. Intrusion
Intrusion function allows to create a zone where the violation by the object causes alarm.
To designate the area check the DRAW AREA field and mark the zone using up to 6 points. To place
the points press the left mouse button on the preview screen. Try to place the zone in the center of the
image to make it easier for the camera to detect the object.
You can monitor up to 4 zones. To edit them use the AREA field to switch to another zone edition.
To ENABLE analytics detection set the INTRUSION field to ON and press the APPLY button. If the
tripwire or object detection were enabled will be deactivated by activating intrusion analysis on
selected channel.
The DURATION filed specifies the length of time the camera remains in the alarm state after the
analysis event occurs. The next alarm from the analysis event will be triggered after the duration
alarm specified by this parameter.
NVR OPERATING
