NVR-
5836 User’s manual (Short) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
15
VII.
Next you have to fill user name and password for each camera that you add to the NVR.
Please double click at CHANNEL LIST “A” or select required channel from the CHANNEL
dropdown menu ”B”. Next check if all settings for this channel are correct, fill username and
password “C” and confirm by using SAVE button. Now you can select next channel from the
dropdown menu.
If you set up the same user name and password and other parameters for all cameras you can simply
type them and save for first channel, and then press COPY TO button “A”, select required channels at
window “B” to copy them and confirm by OK button. Note that IP address is unique and doesn’t copy.
After finishing following procedure NVR is ready to use.
Additionally you should create user accounts for each operator.
For event recording you should set up motion/alarm setting in the camera and modify SCHEDULE
RECORDING and MOTION in the NVR.
For event notification you should set up motion/alarm setting in the camera, configure NETWORK
SETTING for using Internet and EMAIL SETTING.
NVR OPERATING
B
A
A
B
C
