NVIP-8DN7560V/IRH-
2P User’s manual ver.1.0 (short form)
All rights reserved © AAT Holding S.A.
8
2. START-UP AND INITIAL IP CAMERA CONFIGURATION
2.1. Description of connectors and control tools
1. Port Ethernet 1000 Mb/s (RJ-45 connector)
CAUTION
!
It is recommended to connect camera to a switch (or other device) equipped with a
network port with capacity of 1 Gb/s
2. Analog video output (maintenance only, connection cable is not in set included)
Pin 1 - Video
Pin 2 - GND
3. Power Connector
4. RS-485 connector (function not available)
5. Reset button (restoring hardware factory defaults)
6. Alarm and audio input/output connector
7. SD/SDHC/SDXC card slot
8. IR LED
9. Light sensor
START-UP AND INITIAL CAMERA CONFIGURATION
Power Connector
10 ~ 48 VDC
24 VAC
Pin 1
10 ~ 48 VDC (+)
24 VAC
Pin 2
10 ~ 48 VDC (-)
24 VAC
8
9
NVIP-8DN7560V/IRH-2P
