NVIP-8DN7560V/IRH-
2P User’s manual ver.1.0 (short form)
All rights reserved © AAT Holding S.A.
10
2.3. Connecting power supply to the camera.
The camera is supplied by using RJ45 network socket. To run NOVUS IP camera you have to connect
ethernet cable between camera and network switch with PoE support (IEEE 802.3at). You can also use
a power injector compatible with IEEE 802.3at standard.
Description of power connectors is located in chapter 2.1 of this manual.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
START-UP AND INITIAL CAMERA CONFIGURATION
