NVIP
-
3SD
-
6200/20 User
’
s manual (short form) ver.1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
•
In order to Then tighten the three screws to fix the bracket and camera.
•
By using the description of the terminals from the previous chapter and the appropriate
accessories, connect required signal and power supply cables.
CAUTION!
Connection the power cable to the camera must be performed after disconnecting the power
source. Power can be on only after the camera is fully mounted.
•
Put the excess cable back into the bracket.
•
Screw on the camera with the bracket to the wall.
•
After the above steps the camera is ready to work
START
-
UP AND INITIAL CAMERA CONFIGURATION
