NVIP
-
3SD
-
6200/20 User
’
s manual (short form) ver.1.2
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
7
START
-
UP AND INITIAL IP CAMERA CONFIGURATION
1.4. Package contents
After you open the package make sure that the following elements are inside:
If any of this elements has been damaged or missing during transport, pack all the elements back into
the original box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches
the temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short
-
circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular in-
puts, outputs and adjusting elements that the device is equipped with.
2. START
-
UP AND INITIAL IP CAMERA CONFIGURATION
2.1.
Description of connectors
1. RJ
-
45 connector
2. Audio Output
3. Audio Input
4. Alarm Input/Output
5. Power connector 24VAC/24VDC
6. RS
-
485 connector
7. BNC AHD/TVI signal output
8. Grounding
Novus IP PTZ camera
1 pcs
Wall bracket
1 pcs
User
’
s manual (short form)
1 pcs
Power supply
1pcs
24 VDC +
24 VDC
-
Power connection 24VDC
