NVIP –2DN3000C-1P- User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
17
6. RESTORING FACTORY DEFAULTS
NOVUS IP cameras allow to restore defaults via:
software (web browser level)
software (NMSiptool)
hardware (using reset button)
6.1. Restoring factory defaults by software means
User can restore default settings of the IP camera except network settings (optional). To restore to
default settings go to: “Advanced Config -> Config Backup & Restore” tab. Process of restoring takes
about two minutes.
6.2. Restoring factory defaults by software means (NMSiptool level)
NMSip (version 1.23.4 or later) allows to restore factory defaults. To restore settings find camera via
NMSiptool, click right mouse button and choose “ Restore default configuration”. Next, within 30
seconds, it is required to turn the camera power off and on.
RESTORING FACTORY DEFAULTS
