NVIP –2DN3000C-1P- User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
16
ELECTRIC CONNECTORS AND ACCESORIES
Alarm output
Camera alarm output is an relay output type.
Load Connector:
500mA for 12V additionally 0,5A for 30VDC, 0,25A for 125V and 0,125A for
230VAC
Alarm output electric connections
5.4 SD card installation
Camera supports SD cards up to a maximum size of 64GB. In order to install the card properly, please
follow the instructions below:
Turn the camera off
Unscrew cover located at the camera back
Mount SD card in the socket
Mount card cover and screw to camera back.
Turn the camera on
Check the micro SD card by checking its capacity in the “System Config” -> “SD Card”
tab
.
Alarm
Output (-)
Alarm COM
Alarm
Output (+)
Alarm NO
Indicator
power
supply
Indicator
IP Camera
SD card slot
