NVDN-601V/IR-white, NVDN-601V/IR-black -
User’s manual ver. 1.1.
All rights reserved © AAT Holding Sp. z o.o.
9
INSTALLATION
4.1 CONNECTIONS
The camera is equipped with a video and power cable finished with 2 plugs, one for video output
(yellow one), the other for power supply 12VDC±10% (red one). Images below show plug
polarization.
The following connecting order should be kept:
connect video cable to the BNC plug
connect power supply to the power plug
ATTENTION
: Prior to connecting the power supply make sure that all required parameters (output
voltage, output current and polarization) are correct. Using improper power suppl y
may cause malfunction or camera damage. In such a case, warranty is void.
4.1.1 Extra video output connection
Camera has an additional video output which is very useful during installation or camera
maintenance. To use the Extra Video output please connect the included cable (mentioned in the
chapter 1 equipment list) to the Extra Video connector presented in the chapter 3.2
wideo
zasilanie 12 VDC +/- 10%
wideo
masa (GND)
+
- (GND)
