NVDN-601V/IR-white, NVDN-601V/IR-black -
User’s manual ver. 1.1.
All rights reserved © AAT Holding Sp. z o.o.
8
INSTALLATION
4. INSTALLATION
Prior to installation please familiarize yourself with the product, its parameters and installation
process.
To install the camera please follow the instructions below:
Remove the cover by unscrewing three screws mounting it to baseplate and open the camera.
Place seal base of the camera in a desired place and use its mounting holes as a drilling pattern.
Mark drilling points using a punch.
Drill the screw holes and cable hole using an appropriate driller, in case of concrete ceiling or
wall mounting please use appropriate plastic plug and screws (not included in the package).
Mount the camera to desired surface using included screws or if needed, different mounting kit
(not included). Please check if the sealing rubber gaskets are placed on the mounting screws. If
required, additionally seal mounting holes with appropriate sealing mass
Adjust the position of the camera module.
Remove the IR illuminator (by gently prying latches visible on its edge). Unscrew blocking
knobs and adjust focal length and focus.
If needed, adjust the desired settings in the camera menu using joystick.
Put on IR illuminator and camera cover back, screwing it onto the base.
5
6
