NVDN-601V/IR-white, NVDN-601V/IR-black -
User’s manual ver. 1.1.
All rights reserved © AAT Holding Sp. z o.o.
16
SETTINGS
D-EFFECT
menu allows to set additional digital functions.
D-ZOOM
allows to set the digital zoom up to x32. After entering to sub-menu it is possible to
set:
RANGE
magnification (from 1.0 to 32)
PAN
refers to horizontal position of the picture (from -100 to 100)
TILT
refers to vertical position of the picture (from -100 to 100)
SMART ZOOM
allows to turn on the digital zoom up to x5.0 when the motion is detected.
After entering to sub-menu it is possible to set:
RANGE
magnification (from 2.0 to 5.0)
POSITION
allows to set the position of magnified area.
SENSITIVITY
sensitivity of motion detection (from 0 to 100)
TIME
sets the time of displaying magnified picture.
DIS
(Digital Image Stabilisation). This function eliminates image blurring from camera
shaking caused by vibrations from passing vehicles or gusts of wind.
FREEZE
holds the picture in turning on moment.
MIRROR
allows to change viewpoint as mirror/ rotate/ v-flip.
NEG. IMAGE
enables/disables displaying of the negative video image.
IMAGE ADJ
allows for enabling the additional picture effects.
SHARPNESS
changes sharpness of the displayed video picture (from 0 to 31).
MONITOR
selects between
CRT/LED
as used monitor, and allows to set
GAMMA
,
PED LEVEL
and
COLOR GAIN
.
LENS SHADING
allows to compensate darkened areas appearing in screen corners due to
lens usage. Selecting
ON
allows to enter a sub-menu, where can be adjusted:
LEVEL
sets the function sensitivity (from 0 to 60)
H-CENTER
refers to horizontal position of the center.
V-CENTER
refers to vertical position of the center.
DEFECT
allows to adjust parameters used in Dead Pixel Correction function. pressing
SET
displays the submenu allowing to adjust
SENSUP, DIFF, THRESHOLD
and then press
START
to run.
Note: White CCD pixels are not an indicator of the CCD malfunction, but are inherent
consequence of the manufacturing process.
