NVC-HDN4602V/IR - User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
11
5.1.1
EXPOSURE
submenu
This submenu allows to set the lens parameters, as well as choosing and changing the settings of
the parameters connected with AE and controlling the iris:
MANUAL
Manual settings of the lens operating mode.
DC
Automatic lens mode.
Additionally, by entering the menu:
SHUTTER
Selection of shutter mode. Automatic (
AUTO
) shutter mode as well as manual
adjustment in the range 1/50~1/100000s are available.
BRIGHTNESS
Sets brightness level (
BRIGHTNESS
) in the range from 0 to 255.
AGC
Automatic Gain Control function. Allows for switching between
LOW
(low),
MIDDLE
(middle) and
HIGH
(high) gain values. With
OFF
selected, function is
disabled.
RETURN
Pressing
RETURN
moves to a higher-level menu.
5.1.2
WHITE BAL
submenu
This feature allows to set appropriate color settings using following options:
WB MODE
- allows to select from the following options:
ATW
- Auto tracking white balance based on color temperature.
PUSH
- This mode enables adaptive setting of white balance. In order to
obtain the optimum state under the current illumination, direct the camera at a sheet
of white paper and press
RETURN
. When lighting parameters change ( e.g. light
bulbs changed to halogen lamps, daylight to artificial light etc. ), procedure
mentioned above should be repeated;
AWC
- Auto white balance adjustment.
MANUAL
- Manual mode settings. In case of inappropriate color settings for
ATW, AWC
modes it is possible to set red (
M-WR
) and blue (
M-WB
) values
manually. Color values range from 0 to 255 and are represented by sliders. Any
change in the color components are instantly applied to the image. Sliders become
active only in manual mode of the white balance function.
SETTINGS
