NVC-HDN4602V/IR - User’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
14
SETTINGS
5.1.8
FUNCTION
submenu
Selecting and entering displays the following screen:
MIRROR
Allows to enable/disable mirror image function.
SHARPNESS
Allows to change sharpness of the displayed video picture (0~30).
GAMMA
Allows to adjust gamma coefficient manually.
MONITOR
Selecting allows to select one of two gamma coefficient values for CRT/ LCD
monitors respectively.
LSC
Allows to compensate darkened areas appearing in screen corners due to lens
usage. Selecting
ON
allows to enter a sub-menu, where function sensitivity
can be adjusted.
MOTION DET.
This menu allows (provided that
ON
option is selected) to turn a built-in
motion detection feature on or off. Motion detection may simultaneously be
conducted in four independent zones (with their size and location selectable by
user). Detection of motion displays an appropriate information superimposed on the
screen.
After selecting
ON
and pressing
RETURN
the submenu allowing to adjust motion
detection settings is displayed, as depicted below.
ALARM
Option disabled
AREA
Allows to open a sub-menu responsible for positioning and setup of any
of the four motion detection zones. Changes are performed identical to BLC
adjustment (described earlier).
FUNCTION
MIRROR
OFF
SHARPNESS
------|-- 016
MONITOR
CRT
LSC
OFF
MOTION DET.
OFF
PRIVACY
OFF
SETUP
RETURN
MOTION
ALARM
ON
AREA
SENSITIVITY --------|-- 025
DISPLAY
TRACE
HOLD TIME
--------|-- 015
RETURN
