NVC-HC4600V - user’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
12
HLM LEVEL
Sets the function sensitivity in 0-100 range.
MASK1-4
Subsequent
numbers
correspond
directly
to
four
default
compensation functions. Either disabling them or adjusting them
becomes possible by selecting
ON
and entering the subsequent
submenu zone adjustment is performed as described in
the BLC chapter.
D-WDR
This function allows to enable/disable wide dynamic range function
that enables to effectively observe the scene with different
illumination levels.
5.1.4 3D/DNR
submenu
Allows to switch between DNR intensity levels (OFF, LOW, MID, HIGH, CNR - function
enables noise reduction in static pictures, but disables it when a motion is detected).
5.1.5
SENSE-UP
submenu
Allows to set an iris opening time multiplier (1/50—1/100000s), in x2 ~ x1024 range.
Disabling the function (
OFF
) or selecting
AUTO
is also possible.
5.1.6
D&N
submenu
Allows to adjust day/night settings. Available settings are:
COLOR, B&W
or
AUTO
.
Selecting the latter allows to enter sub-menu containing the following options:
BURST
enables/disable chroma burst signal.
DAY->NIGHT
sets the illumination threshold that switches the camera from day to
night mode (0~40)
NIGHT->DAY
sets the illumination threshold that switches the camera from night to
day mode (0~40)
DELAY TIME
Sets the delay between color and b/w mode switching (0~15 s.).
Note: D-N value should be higher than N-D.
RETURN
RETURNs to a higher-level menu
SETTINGS
D&N AUTO
D->N
033 ||||
|
|
N->D LEVEL 026 ||||
|
|
DELAY
1 SEC
RETURN
