NVC-HC4600V - user’s manual ver. 1.0.
All rights reserved © AAT Holding Sp. z o.o.
8
INSTALLATION
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before
mounting.
Put base of the camera, as a mounting template, to the wall or ceiling and mark drill holes.
Drill 3 holes using markings.
Drill additional hole for video and power cables.
Using 3 mounting screws from the package attach the base of camera to the ceiling/wall.
Put video and power cables through a previously drilled hole in the wall/ceiling.
Put dome cover on the camera and gently screw the base-ring joint by counter-screw
Manually point the camera in a desired direction to obtain a desired scene view.
Secure the base-ring joint by counter-screw.
4.1 Power supply connection
NVC-HC4600V camera is 12 VDC ± 10% supplied. Please see the power supply terminal
connections below.
Base of camera
Mounting screws
Camera
Dome cover with counter
screws
wideo
video
GND
+
- (GND)
12V DC +/- 10% (red
Video (yellow)
