NVC-DN6127SD-II and NVC-DN6137SD-II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
3
OSTRZEśENIA
IMPORTANT SAFEGUARDS AND WARNINGS
ATTENTION!
PRIOR TO UNDERTAKING ANY ACTION THAT IS NOT PROVISIONED FOR THE
GIVEN PRODUCT IN ITS USER’S MANUAL AND OTHER DOCUMENTS DELIVERED
WITH THE PRODUCT, OR THAT ARISES FROM THE NORMAL APPLICATION OF THE
PRODUCT, ITS MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY
OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN ACTION SHELL BE
EXCLUDED.
IMPORTANT SAFEGUARDS AND WARNINGS
1. Prior to undertaking any action with the device, please consult following manual, and read all the
safety and operating instructions before operating the device.
2. Please keep the following manual for the time of device’s lifespan in case when referring to the
contents of the manual would become necessary.
3. Follow all the safety precautions described in this manual. Improper installation and camera
operation may have impact on operator safety as well as camera operational reliability and lifespan.
4. Camera mounting and operations should be conducted according to this manual, both for users and
service personnel.
5. Please unplug the unit from the power before starting maintenance procedures.
6. Please use only attachments / accessories specified by the manufacturer.
7. Do not install the camera near any steam sources or near water (any wet area like pools, bath tubs
etc.).
8. Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.)
is not recommended since it may lead to heat build-up and damaging the device itself in
consequence.
9. Mounting the camera on unstable surface or using not recommended mounts is forbidden.
Improperly mounted camera may be the cause of fatal accident or be seriously damaged itself.
Camera must be mounted by qualified personnel with proper authorization, in accordance to user’s
manual.
10.Device should be supplied only from power sources which parameters are in accordance to one’s
pointed out by the producer in camera technical datasheet. Therefore it is forbidden to supply the
camera from power sources with their parameters unknown, unstable or not meeting the producer’s
requirements.
11.Signal cables (conducting TV or/and telemetric signal) should be placed in a way excluding the
possibility of damaging them by accident. Special attention must be paid to cables going out of the
camera and connecting power supply;
