NVC-DN6127SD-II and NVC-DN6137SD-II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
16
3. MOUNTING THE CAMERA
In order to obtain declared watertightness camera should be mounted on flat, smooth surfaces.
When mounting the camera on uneven/rough surfaces please seal the mounting place additionally
with appropriate sealing mass, paying special attention to mounting holes.
Caution!
Due to safety reasons, maximum load capacity of surface shouldn’t be less than 25kg.
In order to successfully mount a camera, please follow the procedure below:
•
Put the bracket to the wall in a desired mounting place (with cable hole). Taking the bracket’s
base screw holes as a pattern, mark future drilling holes for screws using a punch.
•
Drill 4 holes in accordance with previously done markings and base hole placement (when
mounting the camera to concrete surfaces please purchase appropriate mounting accessories)
•
Put required cables through the seal and bracket’s arm.
•
Mount the bracket with seal, paying special attention to all mounting holes and additionally
sealing them with appropriate sealing mass if necessary.
•
Using safety cable, attach the dome to the bracket.
MOUNTING THE CAMERA