NVC-DN6127SD-II and NVC-DN6137SD-II User’s manual, ver. 1.0
All rights reserved © AAT Holding sp. z o.o.
29
5.4.2. MOTION SETUP
MOTION SETUP
PROGRAM. LOCK
: ON
PWR UP ACTION
: ON
AUTO FLIP
: ON
PAN MAX SPEED
: 360/SEC
PAN DIRECTION
: NORMAL
FRZ IN PRESET
: ON
<PARKING ACTION SETUP>
<ALARM INPUT SETUP>
BACK
EXIT
PROGRAMING LOCK
- function allows to disable direct programming or preset removal and
surveillance functions.
PWR UP ACTION
- in case of camera restart (e.g. after power loss) camera resumes with most
recent surveillance function.
AUTO FLIP -
function that automatically flips the picture 180
°,
so it isn’t displayed „upside down”.
PAN MAX SPEED -
adjusts camera’s maximum pan speed in 1 ~ 360/sec range.
PAN DIRECTION -
allows to switch camera’s pan direction
FRZ IN PRESET
- function freezes the picture while switching between presets
a). PARKING ACTION SETUP -
allows to enable a function (preset, pattern, auto-scan or tour)
after a pre-defined time of user’s inactivity.
PARK ENABLE -
enables or disables the function.
WAIT TIME -
sets idle time, ranging from 1 second to 3 hours.
PARK ACTION
- selects function to be executed after
WAIT TIME
value is exceeded.
b). ALARM INPUT SETUP
- Impulse appearing on the camera’s alarm input activates
programmed function. Alarm may be associated with any preset, pattern, auto-scan or tour.
ALARM NO: -
selects alarm input
TYPE -
sets input mode either to normal open or normal closed.
ACTION
- allows to set action on alarm.
HOLD TIME
- sets the alarm action duration. Duration may equal the alarm input activation
time, or other defined period of time after input triggering.
POST ACTION
- sets the post-alarm action.
CAMERA OSD MENU
