All rights reserved © AAT Holding S.A.
7
NVAHD-2DN5202H/IR-1- ver. 1.0 - User’s manual
3.1. Dimensions:
3.2. View of the camera, layout of the camera items:
4. INSTALLATION
Make sure the location can support 5 times the total weight of the bullet camera. Be careful not to jam
or peel insulation covering of the cable. This may result in malfunction or a fire hazard.
Using the template, mark the position of the mounting holes
Drill holes for the mounting screws and the hole for video and power cables
Pass the power and video cables through the hole in the base of the camera
Pass the cables through a previously prepared in the ceiling/wall hole
Using screws included in the box, attach the base of the camera to the ceiling/wall
Adjust the position of the camera and the lens hood and then lock them with position with
suitable screws/nuts.
Make the appropriate camera settings via the OSD menu
4.1 Zoom and Focus Setting
The camera has a motor-zoom lens that can be controlled using a joystick mounted on the signal
cable or via a protocol UTC operated from the recorder or the remote control. Use the
UP, DOWN
(
UP, DN
). We set the interesting zoom and the camera will automatically adjust itself to that seen us
focus plan. To manually adjust the focus must use the keys
LEFT, RIGHT
.
SPECIFICATION/INSTALLATION
Śruba
kontrująca
Regulacja
pionowa
Regulacja
pozioma
Obrót kamery
