NVAHD
-
2ATM
-
4011
-
user
’
s manual ver. 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
8
INSTALLATION
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before
mounting .
Drill holes for mounting screws at the installation site
Unscrew the camera from the holder
Screw the holder to the place of installation with the provided screws
Screw the camera to the holder
Adjust the position of the camera module and tighten the fixing screws
4.1. Power supply connection
NOTE: Device should be supplied only from a power sources whose parameters are in
accordance with those specified by producer in the camera
’
s technical datasheet. Therefore, it is
forbidden to supply the camera from power sources whose parameters are unknown, unstable
or not meeting the producer
’
s requirements.
4.2 Camera mode settings
Camera got four video modes: TVI, AHD, CVBS and CVI. Depends on used DVR. User need to set
DIP switches according to the picture:
power 12V DC +/
-
10%
video
video
(GND)
+
-
(GND)
