NVAHD
-
2ATM
-
4011
-
user
’
s manual ver. 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
SETTINGS
5. SETTINGS
The camera has an OSD menu displayed in the foreground of image. During normal operation
status information can be displayed on the image. To navigate menu and make changes please use
joystick located under the camera dome:
To enter the menu, press the joystick, which sends
ENTER
command to the
device. To choose submenu, select the
UP, DOWN (U, D)
directions. If the sub
-
menu contains the symbol
that indicates the opportunity to enter to the
settings by pressing the
ENTER
key. To change the parameters of selected
items, press
LEFT, RIGHT
buttons.
To exit the menu and saves changes, select
EXIT
and next select
SAVE&END.
By selecting
RESET
you can restore the factory
settings, and by selecting
NOT SAVE
you can exit the menu without saving
changes. To exit the submenu, select
RETURN
and press
ENTER.
Choosing
(with left or right button)
SAVE&END
in the
RETURN
position saves changes
and closes the menu.
The camera menu operation is also possible by Novus NHDR
-
4000 series recorders using the COAX protocol. In the recorder
channel menu, press the PTZ icon
. The control panel will
appear on the left side. The UTC tab shows buttons with the same
functionality as the joystick described above.
CAUTION:
In case of the image failure after connecting camera, or video loss due to changes in the menu, it
is possible to restore the factory settings. Following procedure is also recommended when
camera menu is not working. To restore factory settings:
1. Turn the power off and on again.
2. If the picture does not appear, perform the following sequence of joystick keys: press ENTER,
UP, RIGHT, press ENTER. Successful completing these steps restores factory settings (AHD
1080p, PAL).
