NVAHD
-
2ATM
-
4011
-
user
’
s manual ver. 1.0
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
15
SETTINGS
PRIVACY
-
allows to enable (by selecting
ON
) privacy zones. Part of the screen may be
masked using
four rectangular zones. Selecting
ON
and pressing
ENTER
displays a sub
-
menu, containing four masks
positions.
SELECT
-
selects the number of the area for further settings.
DISPLAY
-
turns on/off particular area. Available masking methods: with overlaid color, color
reversal or tessellation (
COLOR, INV, MOSAIC
). Pressing
ENTER
after selecting
COLOR
,
INV
or
MOSAIC
option will open a new submenu which allows to set the position and size of the zone.
COLOR
-
sets the color masking (available only if
COLOR
option was chosen).
TRANS
-
allows you to set the degree of transparency mask (available only if
COLOR
option was
chosen).
DEFAULT
-
restores default settings.
LANGUAGE
-
switches between OSD languages: Polish, English, Russian and others.
DEFECT
-
allows to adjust parameters used in Dead Pixel Correction function:
LIVE DPC
-
sets parameters of the defective pixel correction function in real time. Selecting
ON
and pressing
ENTER
button opens a submenu for setting the gain level and the level of
correction.
WHITE DPC
-
allows to a correct "hot pixels". Selecting
ON
and pressing
ENTER
button opens
a submenu where you can specify the size and location of the zone in which the correction will
be made (position
POS/SIZE
), then define the level of correction and amplification (
LEVEL
and
AGC
positions) and set
SENS
-
UP
option (if camera uses
SENS
-
UP
position). Then select
START
position and press
ENTER
, cover the lens tightly and press
ENTER
again. After correcting
process the camera returns to the
DPC WHITE
menu. In the
DPC VIEW
you can check the
correction effect and, if needed repeat the operation with different settings.
LEVEL
,
AGC
and
SENS
-
UP
options allow to change correction parameters.
