Development and manufacturing of non-
destructive testing units and system
Ultrasonic Flaw Detector NOVOTEST UD2301
10
Controls and indicator of the flaw detector located on the front panel,
as shown in Picture 6.1.
Operating connectors are located at the top and bottom sides of the
devices body.
WARNING! To prevent damage of connectors and cables - follow
the instructions below!
Used in the device connectors consist of two parts: the instrument
socket and the cable plug (Pic. 6.2.).
Picture 6.2. Connector used in the device
A method of connecting and disconnecting the plug and socket
shown on Picture 6.2.1. When connecting user must ensured that
the points of red color (if any) are plotted on the plug and the socket
are jumped together.
CAUTION: When disconnecting the plug from the socket, hold its
body in the dotted area. Do not pull the cable!!
Picture 6.2.1 Manipulations with LEMO connectors
