Operation Manual
Hardness Tester NOVOTEST T-UD3
Page. 37
Figure 2.47 - Entering the name for the stored measurement
2.
Move the cursor to the desired character and press the <
> key to select it. When finish
typing a name, press <
> to save. Further, the image from the camera will be transferred
to the display in real time and it will be offered <TAKE A PICTURE> or <SAVE WITHOUT
PHOTO> (Figure 2.48).
Figure 2.48 - Picturing the object
3.
Press key
<
>
to save the measurement without photos, or point the camera at the
measured object so that the measuring point can be seen and press <
> to take photo. If the
place is poorly visible due to lack of lighting at the time of shooting, the flash will <highlight>
it (when it is switched on in <SETTINGS> section).
4.
After shooting, the display will look like in Figure 2.49.
Figure 2.49 - After shooting
5.
Press <
> key to save photo or key
<
>
to take another picture.