Development and manufacturing of non-
destructive testing equipment and system
Hardness tester NOVOTEST T-UD3
31
After pressing the shutter release button and the impact body hitting
in the area of measurement sounds a beep and the display shows
the value of measured hardness.
WARNING! The minimum distance between the imprints of
measurements must be not less than 3 mm.
10. Measurement modes
To selecting the measurement mode go to the
Measuring
and press
.
The device will offer you the following measurement modes:
-
Graph
– mode of the construction graph;
-
Histogram
– mode of the construction columnar bar chart;
-
Statistic
– statistics mode;
-
Smart
– mode of filter incorrect measurements;
-
Signal
– the display signal mode (only for Leeb).
