Development and manufacturing of non-
destructive testing equipment and system
Hardness tester NOVOTEST T-UD3
8
6. Preparations for operation
6.1. Battery supply
The hardness tester NOVOTEST T-UD3 is powered by
accumulators.
You will need three AA 1,5V rechargeable (Nickel-Cadmium or
Nickel-Metalhydrid) batteries.
NOTE! The batteries must be fully charged before first use.
Use of the batteries.
- Open the battery compartment.
- Insert the batteries, observing the correct polarity.
- Close the battery compartment.
Used or defective batteries are special refuse and must be disposed
of according to the governing laws!
6.2. Connection of probes.
Socket of the probe is at the top of the information processing unit.
Connect the probe cable to the NOVOTEST T-UD3 socket in
accordance with the marks on the connector.
