Development and manufacturing of non-
destructive testing equipment and system
Hardness tester NOVOTEST T-UD3
3
1. Introduction
The following operation manual explains the preparation, setup,
principles of operation, usage, and troubleshooting of the hardness
tester NOVOTEST T-UD3 and its versions T-U3, T-D3.
Please, read this instructions carefully for operate the hardness
tester NOVOTEST T-UD3 functions quickly and effectively.
In doing this you will be able to take full advantage of the function
range of the instrument. At the same time, you will also avoid errors
and wrong operation which in turn would cause incorrect test results
and thus could lead to injury and damage.
2. Appointment
The hardness tester NOVOTEST T-UD3 is handy, easy to operate
and can carry out tests quickly without any difficulties.
Hardness tester NOVOTEST T-UD3 is mainly suitable:
• for measurement hardness of low and non-alloyed steels;
• for measurement hardness of high-alloyed steels;
• for measurement hardness of nonferrous metals.
3. Specifications
3.1. Calibration scales
Device has 88 calibration scales of hardness that conventionally
divided into eight scales and eleven materials for each:
