28
To unplug the transducer arrays from the connection cable:
To take a break from treatment and completely disconnect from the device but leave the
transducer arrays on your head, unplug the transducer array cables from the connection
cable box. The four transducer arrays are plugged into the connection cable box as
described in Section 11. The connection cable is plugged into the device at the
connection cable socket.
1. Stop treatment by pressing the TTFields button.
2. Turn off the Optune device using the power button.
3. Unplug the transducer array connectors from the connection box by pulling as
shown in the picture below. You may have to wiggle the transducer array cables
to remove them.
To restart treatment, plug the transducer arrays into the connection box. Plug
each transducer array into its matching color (black or white) that goes with the
transducer array’s position on the head (see earlier in this section).
4. When all 4 transducer arrays are plugged in, turn on the power switch and wait
for self-check to be completed (about 10 seconds). Push the TTFields button to
restart treatment.
Summary of Contents for Optune NovoTTF 200A
