20
Turn off the notification signal by pressing the TTFields button once.
Turn off the device using the power button (on the bottom of the device).
Remove the battery from the battery slot by pressing on the blue buttons on the side
of the battery.
Slide the fully charged battery in the battery slot, gently push down to lock in place.
Turn on the device and start treatment by turning the power button on, wait for the
system to run a self-check (this takes about 10 seconds) then press the TTFields
button (see Section 6).
Place the used battery in the charger for recharging (as described in Section 9).
Checking the Battery Gauge
While you are using Optune, you may want to check how much power is left in your
battery. Checking the battery will not interfere with or stop your treatment.
To check the battery power press the button on the top of the battery cartridge once.
The remaining battery power will be indicated by the readout to the right of the
button. The gauge reads from full to empty, like a gas gauge in your car.
Summary of Contents for Optune NovoTTF 200A
