www.flexco.com
—20—
www.flexco.com
For increasing the clearance between the blade and the lower traction roller: using a 5 mm hex key to
engage screws, loosen screw C counterclockwise one quarter turn and tighten screw D clockwise one
quarter turn or until moderately tight.
B15
C
D
Ply 130
™
Maintenance – Measure and Adjust Blade/Roller Clearance As Necessary
To decrease the clearance between the blade and the lower traction roller: loosen screw D counterclock-
wise one quarter of a turn and tighten screw C clockwise one quarter turn or until moderately tight.
B1
Lock the adjusting handle back to 0. Check for clearance between the blade and lower traction roller
by inserting the clearance shims. There should be little resistance as the operator slides the white shim
between the blade and the lower traction roller and the black shim should not pass through between the
blade and the lower traction roller. Repeat steps B14-B17 as necessary.
B17
B16
D
C
The purpose of the adjustment is to turn the eccentric shaft. It is important to turn, for both A and B, a
recommended one quarter turn or less prior to rechecking with shims.
Eccentric
Shaft
