—11—
—10—
Ply 130
™
Maintenance – Blade Replacement
With moderate force, push
calibration jig into Ply 130
using a block of wood or tool
simultaneously turning on Ply
with foot switch. When lip of
jig is tight up against the Ply
frame, release the foot switch and
toggle operating switch to “OFF”.
Disconnect power.
Note: Calibration jig must be
parallel to frame.
Caution: Note pinch
point as jig enters the ply
separator frame.
B1
A6
Warning!
Keep clear of
this side of jig.
Push jig with tool here.
!
!
Pinch Points
