www.flexco.com
—18—
www.flexco.com
Ply 130
™
Maintenance – Measure and Adjust Blade/Roller Clearance As Necessary
For increasing the clearance between the top roller and blade: using a 5 mm hex key to engage screws,
loosen screw B counterclockwise one quarter turn and tighten screw A clockwise one quarter turn or
until moderately tight.
To decrease the clearance between the top roller and blade: loosen screw A counterclockwise one
quarter of a turn and tighten screw B clockwise one quarter turn or until moderately tight.
B10
B11
A
B
B
A
The purpose of the adjustment is to turn the eccentric shaft. It is important to turn, for both A and B, a
recommended one quarter turn or less prior to rechecking with shims.
Eccentric
Shaft
