Novik Neo NOVO-1500, Instruction Manual

Page: 9 / 32

englis
h
Wiring
PARALLEL WIRING USING THE SPEAKON
®
CONNECTORS
With this wiring, a signal sent to Channel 1 is paralleld to both channels so that it is reproduced by both speakers.
1- See Figure 5. On the back panel, set the Output Mode Switch to PARALLEL.
2- Wire the speaker to the SPEAKON ® connector as shown.
Figura 7. Parallel Wiring With SPEAKON ® .Connectors.
PARALLEL WIRING USING THE BINDING POST CONNECTORS
With this wiring, a signal sent to Channel 1 is paralleld to both channels so that it is reproduced by both speakers.
1- See Figure 6. On the back panel, set the Output Mode Switch to PARALLEL.
3- Wire the speaker to the Binding Post connectors as shown.
Figure 8. Parallel Wiring With Binding Post Connectors.