Novik Neo NOVO-1500, Instruction Manual

Page: 8 / 32

englis
h
Wiring
BRIDGE-MONO WIRING USING THE BINDING POST CONNECTORS
Bridge-mono mode doubles the output power of the amplifier.
1- See Figure 5. On the back panel, set the Output Mode Switch to BRIDGE.
2- Wire the speaker to the Binding Post connectors as shown.
3- Only the Channel 1 Volume Control works in Bridge-mono mode.
Figure 5. Bridge-Mono Wiring With SPEAKON ® Connectors.
BRIDGE-MONO WIRING USING THE SPEAKON
®
CONNECTORS
Bridge-mono mode doubles the output power of the amplifier.
1-See Figure 5. On the back panel, set the Output Mode Switch to BRIDGE.
2-Wire the speaker to the Speakon connector as shown.
3-Only the Channel 1 Volume Control works in Bridge-mono mode.
Figura 6. Conexión Puente-Mono con conectores SPEAKON
®
Figure 6. Bridge-Mono Wiring With Binding Post Connectors.