Novik Neo NOVO-1500, Instruction Manual

Page: 6 / 32

PROTECT
POWER
CLIP
ON OFF
SIGNAL
0
PROTECT
CLIP
SIGNAL
MAX
(BRIDGE)
CH 1
0 MAX
CH 2
9
FRONT PANEL
1-Rack-mount hole (one of four)
2-Protect LED: Yellow LED, one per channel, indicates channel shutdown.
3- Clip LED: Red LED, one per channel, flashes when signal is audibly distorting.
4-Signal Presence LED: Green LED, one per channel, flashes when input signal exceeds -40 dBu.
5-Power Switch: Push-on, push-off..
6-Power LED: Blue LED illuminates when amplifier is on.
7- Volume Control: Sets output level of each channel.
8- Grille: Allows flow-through ventilation from front to back.
9- LCD Screen (ONLY NOVO-2500): It shows operations mode (STEREO/BRIDGE/PARALELL) and both channels
temperature.
BACK PANEL
9- Reset Button: Resets the circuit breaker.
10- Power Cable: Permanently attached cable connects to AC mains power.
11- Output Connectors: One Speakon per channel connects to loudspeakers.
12- Output Connectors: One pair binding posts per channel connects to loudspeakers.
13-Grille: Allows flow-through ventilation from front to back.
14- Output Mode Switch: Stereo (dual), Parallel or Bridge.
15- Input Connectors: Balanced XLR, one per channel.
16- Input Connectors: TRS inputs, Channels 1 and 2.
17-Inputs Connectors: RCA, one per channel.
18- Sensitivity: Three position operating switch to adjust amplifiers sensitivity according to signal source.
19-Limiter: Switch for limiter activating, witch fixes al 5% the maximum distortion value, thus protecting loud-
speakers and improving listening quality at high volumes.
20-Ground/Lift Switch: Setting the amplifier to be grounded or lifted.
1 2 3 4 5 6 7 8
10
10
12 12
12 12 16 16
14
11
11 9 11
13
13 13
15 15
15 15
18
18
14
19
19
20
20
16 16 17
englis
h
NOVO-500/900/1500
NOVO-2500