Novell OPEN WORKGROUP SUITE SMALL BUSINESS EDITION 2.0, Administration Manual

Page: 55 / 77

Anti-Spam (MailScanner)
13
no
vd
ocx (
e
n)
1
1
Decemb
er
2
007
55
13
Anti-Spam (MailScanner)
MailScanner scans all e-mail for viruses, spam, and attacks against your network’s security. After
the install is complete, no additional configuration is necessary. Be sure to install GroupWise
®
and
ClamAV before installing MailScanner.
IMPORTANT: If you want to install Groupwise and MailScanner on the same server, use the Add/
Remove function to add MailScanner only after Groupwise is installed. Adding these two
applications simultaneously at the initial installation might cause the Groupwise install to fail.
For additional information, see the MailScanner documentation site (http://www.nk.ca/mailscanner/
docs.html) .
Š
Section 13.1, “Installing MailScanner Basic,” on page 55
Š
Section 13.2, “Installing MailScanner Advanced,” on page 55
Š
Section 13.3, “Post-Installation,” on page 55
13.1 Installing MailScanner Basic
Use the basic install when GroupWise is already installed on the same server as MailScanner.
1 Click Add/Remove under Components , then select All . Scroll down to Anti-Spam
(MailScanner) and click Install.
2
Click Basic , then click Next .
3 Review the settings. To make a change, click Back . To proceed with the installation, click Next .
4 The MailScanner basic installation is complete. Click Finish to proceed to the available
software page. MailScanner is now listed on the installed software list and can be administered
from the
MailScanner administration link.
13.2 Installing MailScanner Advanced
Use the advanced install when GroupWise is installed on a server separate from MailScanner.
1
Click Add/Remove under Components , then select All . Scroll down to Anti-Spam
(MailScanner) and click Install.
2 Select Advanced , then click Next .
3 Specify SMTP Relay Host settings, then click Next .
4 Review the settings. To make a change, click Back . To proceed with the installation, click Next .
5 The MailScanner advanced installation is complete. Click Finish to proceed to the available
software page. MailScanner is now listed on the installed software list and can be administered
from the
MailScanner administration link.
13.3 Post-Installation
Š
Section 13.3.1, “Helpful Links,” on page 56