Installing and Configuring Novell Cluster Services on OES 2 Linux
47
no
vd
ocx
(e
n)
7 Ja
nua
ry 201
0
2
In YaST, select
Open Enterprise Server > OES Install and Configuration
.
3
On the Software Selection page under
OES Services
, verify that the
Novell Cluster Services
option is already installed as indicated by a blue check mark, then click
Accept
.
It is okay to install other OES components at this time, but this setup focuses only on
configuring Novell Cluster Services.
4
Click
Accept
to proceed to the Novell Open Enterprise Server Configuration page.
5
Do one of the following:
Same Administrator:
To use the same administrator credentials that were used to install
Novell Cluster Services, continue with
Section 3.6.3, “Enabling the Novell Cluster
Services Configuration Page in YaST,” on page 48
.
Different Administrator:
To use different administrator credentials than those used to
install Novell Cluster Services, continue with
Section 3.6.2, “Using Different LDAP
Credentials for the Cluster Configuration,” on page 47
.
3.6.2 Using Different LDAP Credentials for the Cluster
Configuration
You can use different user credentials to configure Novell Cluster Services than were used during
the installation of OES Services on the server by reconfiguring the settings for the
LDAP
Configuration of Open Enterprise Services
option.
