Novell Enhanced Smart Card Method 3.0.1, Installation Manual

Page: 45 / 46

Silent Method Installation on Workstations
A
no
vd
ocx
(e
n)
6 Ap
ril 20
07
45
A
Silent Method Installation on
Workstations
You can silently run the Novell
®
Enhanced Smart Card Method (NESCM) install by passing in
parameters from the command line.
Before silently installing the NESCM from a command line, you should become familiar with the
graphical install and its options.
Table A-1 lists the parameters that can be passed to the method install (
setup.exe
). The method
install is in the
\nmasmethods\novell\enhancedsmartcard\client
directory.
Parameters passed to
setup.exe
after the
/s /v
flags are wrapped in quotes with the
/qn
flag
first. For example:
setup.exe /s /v"/qn BOOL_PASSWORD_FIELD_DESC=0 DISCONNECT=1
REBOOT=0 SMARTCARD_INTERFACE=1"
This example uses the standard password field descriptor, turns disconnected support on, suppresses
the reboot, and specifies PC/SC as the smart card interface.
NOTE: You cannot use spaces in the
PASSWORD_FIELD_DESC
parameter on the command line.
If spaces are required in the password field descriptor, you need to set the following registry setting
manually:
HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Login\Tab
Settings\Credentials\PasswordFieldDescription
Table A-1
Parameters for the Novell Enhanced Smart Card Method Installer
Parameter Required Description Value
ALLUSERS Yes Determines who can
install and uninstall this
program. NULL for current user
only.
1 for Administrators.
2 for Administrators if
rights exist; otherwise,
for current user.
BOOL_PASSWORD_FIELD_DESC Yes Set to 1 for a custom
password field descriptor.
If set to true, then
PASSWORD_FIELD_DE
SC must be set to a
string. 1 or 0
DISCONNECT Yes Set to 1 for disconnected
support; otherwise, set to
0. 1 or 0