Novell Enhanced Smart Card Method 3.0.1, Installation Manual

Page: 11 / 46

Novell Enhanced Smart Card Method Installation
2
no
vd
ocx
(e
n)
6 Ap
ril 20
07
11
2
Novell Enhanced Smart Card
Method Installation
This section describes the installation of the Novell
®
Enhanced Smart Card Method (NESCM).
Š Section 2.1, “Minimum Requirements,” on page 11
Š
Section 2.2, “Installing the Method,” on page 12
2.1 Minimum Requirements
NESCM has the following minimum requirements:
Š Section 2.1.1, “eDirectory Server,” on page 11
Š
Section 2.1.2, “Client Workstations,” on page 11
2.1.1 eDirectory Server
eDirectory
TM
8.7.3 IR9 or eDirectory 8.8 SP1 on one of the following platforms:
Š NetWare
®
6.5 SP6 or later
Š
Windows 2003 Server SP1 or later
Š Linux* SUSE
®
Linux Enterprise Server (SLES) 10 32-bit or 64-bit
Š
Red Hat* AS 4.0 Server 32-bit or 64-bit
2.1.2 Client Workstations
Š
Novell Client
TM
4.91 SP3 installed on Windows XP SP2
A smart card reader and appropriate smart card middleware must be installed and properly
configured on the workstation. The method should work with any Windows XP compliant PC/SC
middleware. It has been tested with the following:
Middleware:
Š
Netsign* CAC version 5.5.71.0
Š Gemplus* version 3.2.2 and 4.2
Š
ActivCard* Gold for CAC 3.01
Š ActivClient* 6.0 PKI Only
Š
CryptoVision* cv act sc/interface 3.2.1
Š eToken* Run Time Environment 3.60
Š
DataKey* CIP 4.07