Novell DATA SYNCHRONIZER, Administration Manual

Page: 10 / 50

10 Novell Data Synchronizer Administration Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Š
Sync Engine
Š
Config Engine
You can start and stop Web Admin at any time, as long as the other Synchronizer services are
running.
Each Synchronizer service has its own set of commands:
Š
Section 1.2.1, “Managing the Sync Engine,” on page 10
Š Section 1.2.2, “Managing the Config Engine,” on page 10
Š
Section 1.2.3, “Managing the Web Admin Service,” on page 10
Š Section 1.2.4, “Managing the Connector Manager,” on page 10
1.2.1 Managing the Sync Engine
Use the following command as
root
to check the status of the Sync Engine:
rcdatasync-syncengine status
Use the following commands as
root
to manually start and stop the Sync Engine:
rcdatasync-syncengine start
rcdatasync-syncengine restart
rcdatasync-syncengine stop
1.2.2 Managing the Config Engine
Use the following command as
root
to check the status of the Config Engine:
rcdatasync-configengine status
Use the following commands as
root
to manually start and stop the Config Engine:
rcdatasync-configengine start
rcdatasync-configengine restart
rcdatasync-configengine stop
1.2.3 Managing the Web Admin Service
Use the following command as
root
to check the status of the Web Admin service:
rcdatasync-webadmin status
Use the following commands as
root
to manually start and stop the Web Admin service:
rcdatasync-webadmin start
rcdatasync-webadmin restart
rcdatasync-webadmin stop
1.2.4 Managing the Connector Manager
Use the following command as
root
to check the status of the Connector Manager:
rcdatasync-connectors status