SHARKPORT PS2 MANUAL
INTRODUCTION
Congratulations! You have purchased the ultimate game enhancer management tool allowing you
to connect your PS2 to your PC in order to manage and store all your Game saves!! To get the
most out of your SharkPort, please visit us at
www.gameshark.com
to register your SharkPort
and receive all of the benefits of being a member and to get all of the hottest saves for the latest
games!!!
SharkPort lets you back-up all the saves you have on PS2 Memory Card to your PC, meaning
you can free up valuable space on your PS2 Memory Cards! You can also delete any saves you
no longer require at the click of a mouse button.
SharkPort allows you to download the coolest Game Saves and Cheats available for your games
from the dedicated website,
www.gameshark.com
, allowing you to Unlock Levels, Have All
Weapons, and Unlock Secret Characters.
1) GETTING STARTED
a) Requirements
To use SharkPort you must have a PC running Windows 98SE or above.
It is advisable to have over 300MB of disk space free for storing the saved games you transfer
from your PS2 Memory Card(s). Your PC will also need a CD-ROM drive and one free USB port.
A PC modem and account with an Internet service provider (ISP) or a dial-up Internet connection
is required to use SharkPort’s online features.
b) Setting up SharkPort for the First Time
Before you can start using SharkPort, you will have to install SharkPort on your PC, connect up
the supplied USB link cable and boot up the SharkPort PS2 CD on your console, all of which is
explained in the following steps below:
c) SharkPort PC Installation
1. Insert the SharkPort PC CD into the CD-ROM drive of your PC and close the drawer.
2. After a few seconds, the installation launch panel will appear. If the launch panel does not
automatically appear, double-click on the My Computer Icon, then double-click on the
CD-ROM icon, and lastly double-click on the SETUP.EXE file to bring up the launch
panel.
3. Follow the onscreen prompts to install SharkPort onto your PC.
d) Connecting the USB Link Cable
1. Connect the supplied USB cable by inserting one end into one of the USB sockets
located on the front of your PS2.
2. Connect the other end of the USB cable to a spare USB socket usually located at the
back of your PC.
Summary of Contents for SharkPort PS2
Page 16: ......
