Novell DATA SYNCHRONIZER - 07-2010, Installation Manual

Page: 29 / 36

Mobility Pack Installation 29
n
ov
do
cx (e
n)
16
Ap
ril 20
10
Š
E-mail messages received after initial synchronization of the mobile device. For convenience,
you can send users a welcome message after their devices have synchronized, so that users can
see that they are receiving e-mail. If users want to receive existing e-mail messages on their
devices, they can mark the messages
Unread in GroupWise to force the existing messages to
synchronize to their mobile devices.
Š
Folders in the Cabinet (but not items in folders until users request them by opening folders)
In Synchronizer Web Admin, you can monitor the progress of data synchronization from
GroupWise to the Mobility Connector, as described in “
Monitoring Mobility Connector
Synchronization Status ” in “ Synchronization Monitoring and Management ” in the Mobility
Connector Installation and Configuration Guide .
IMPORTANT: If you selected Block Incoming Devices during Mobility Pack installation, you must
unblock incoming devices in Synchronizer Web Admin after all GroupWise data has synchronized
to the Mobility Connector. Follow the instructions in “
Blocking/Unblocking Incoming Devices ” in
“ Mobility Connector Configuration ” in the Mobility Connector Installation and Configuration
Guide .
Users must configure their mobile devices to connect to your Synchronizer system. For information
about general device configuration, initial device synchronization, and ongoing synchronization, see
the Mobility Connector Quick Start on the
Novell Data Synchronizer Documentation Web site
(http://www.novell.com/documentation/datasync_connectors1) .
For device-specific information, see the Novell Data Synchronizer Mobility Connector Wiki (http://
wiki.novell.com/index.php/Data_Synchronizer_Mobility_Connector) .
2.2.6 Testing Your Data Synchronizer System
1 Test your Synchronizer system by logging into the GroupWise client and sending yourself an
e-mail message
2 Reply to the message from your mobile device.
If the message synchronizes to your mobile device and the reply on your mobile device
synchronizes back to GroupWise, your basic Synchronizer system is up and running.
3 To customize and expand your Synchronizer system, see Chapter 3, “What’s Next,” on
page 31 .
2.2.7 Uninstalling the Mobility Pack
IMPORTANT: When you uninstall the Data Synchronizer software, certificate files are also
deleted. If you have obtained commercially signed certificates for use in your Synchronizer system,
back them up before uninstall the Data Synchronizer software.
1 In a terminal window on the Synchronizer server, become
root
by entering
su -
and the
root
password.
2 Change to the following directory:
/opt/novell/datasync
3 Run the Synchronizer Uninstallation script:
./ds_uninstall.sh