Novell DATA SYNCHRONIZER - 07-2010, Installation Manual

Page: 23 / 36

Mobility Pack Installation 23
n
ov
do
cx (e
n)
16
Ap
ril 20
10
2.1.6 Planning the Data Synchronizer Database
When you run the Mobility Pack Installation program, it creates a PostgreSQL database used to
store Synchronizer system configuration information and pending events when synchronization
between the Sync Engine and connectors is interrupted. The Synchronizer database is named
datasync
, and the user that has access is named
datasync_user
. You must supply the password
for the Synchronizer database user.
IMPORTANT: Use only alphanumeric characters in the password. Do not include special
characters.
The Mobility Connector uses a secondary database named
mobility
to store events when
synchronization between the Mobility Connector and mobile devices is interrupted. The
mobility
database uses the same username and password as the
datasync
database.
2.1.7 Establishing Data Synchronizer System Security
Configuration and administration of your Synchronizer system is performed through Synchronizer
Web Admin. From Synchronizer Web Admin, you can:
Š
Add connectors to your Synchronizer system
Š
Add users to connectors
Š
Start, stop, and configure connectors
Š
Reconfigure the connection to your LDAP server
Š
Reconfigure the Sync Engine
To protect your Synchronizer system operation and configuration, you must choose one LDAP
administrator user to access Synchronizer Web Admin. This LDAP user becomes the initial
Synchronizer administrator. Make sure that you know this administrator user’s password.
You can add more users as Synchronizer administrators after installation, as described in “ Setting
Up Multiple Synchronizer Administrator Users ” in “ Managing Your Synchronizer System ” in the
Novell Data Synchronizer Administration Guide .
2.2 Setting Up Your Data Synchronizer System
You should already have reviewed Chapter 2.1, “Planning a Data Synchronizer System,” on page 15
and filled out the Mobility Pack Installation Summary Sheet .
DATA SYNCHRONIZER MOBILITY PACK INSTALLATION SUMMARY SHEET
Under Synchronizer Database , specify the password that you want to use for the Synchronizer database.
SINGLE-SERVER DATA SYNCHRONIZER INSTALLATION SUMMARY SHEET
Under Synchronizer Web Admin , specify the LDAP administrator username and password that you want
to grant access to Synchronizer Web Admin.