Novation TWITCH User Manual Download

Page: 9 / 71

English

Installation (Mac OSX)

Before installing, we recommend you download and install the latest ITCH version from

http://www.serato.com/downloads

• Browse using Finder to the location where the ITCH download was saved.

• Double click the ITCH zip file to unpack,

• Then double click the .dmg file to mount the image on your system, and browse to that

volume

• Double click the file called “

ITCH installer

”:

• Follow on-screen instructions to install ITCH.

Installation (PC)

Before installing, we recommend you download and install the latest ITCH version from

http://www.serato.com/downloads

IMPORTANT: Do NOT connect your TWITCH to your PC before you are prompted to do so.

The installer will prompt you to connect it at the appropriate time.

• Browse using Windows Explorer to the location where the ITCH download installer was

saved,

• Unpack the ITCH .zip file and browse to the extracted contents.

• Double click the file called “

ITCH_installer.exe

”

• Follow on-screen instructions to install ITCH.

Note: If Windows warns you that any of the drivers’ certificates cannot be verified, approve

them anyway.

Summary of Contents for TWITCH








































































Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands

Novation TWITCH, User Manual

Search results

Summary of Contents for TWITCH

Reviews:

Related manuals for TWITCH

Brands by name

Popular brands